Diamond Products FZ-3S User Manual
Page 30
Advertising
6.4
End of machining
•
Turn off power unit and unplug mains
•
Relieve pressure from the hydraulic circuits
•
Clean wall saw system, e.g. by hosing it
down
•
Remove blade guard
•
Remove saw blade and keep screws sa-
fely or screw them back into holes
•
Disconnect hoses
–
Turn the locking ring
–
Hold the hose end in straight position
–
Push the coupling sleeve back
–
Remove the hose
–
Connect both ends of the hose package
in order to keep the couplings clean and
protect them from damage during trans-
port
•
Unscrew the guide grips completely
•
Remove the wall saw head
•
Remove the tracks
Thvt
Aa"T
Page 30
FZ_39903
Advertising