Nitek POE48 - Manual

NITEK
TO
CAMERA
TO
NETWORK
UTPLinks
PORT 1 PORT 2 PORT 3 PORT 4
PWR
680480101
NITEK
®
5410 Newport Drive • Rolling Meadows, IL 60008
Phone: (800) 528-4343
Fax: (847) 259-1300
E-mail: [email protected] • Web: www.nitek.net
USA Office:
De Schans 19-21 2a • 8231 KA Lelysted
Netherlands
Phone: +31(0)320 -230005
Fax: +31(0)320 -230005
E-mail: [email protected] • Web: www.nitek.nl
Europe Office:
P O E 4 8 P O E 4 8 P O E 4 8 P O E 4 8 P O E 4 8
UTPLinks Card Installation Guide
The POE48 card is designed to be used with standard PoE type devices such as
cameras, telephone, and access points.
Installation
- Insert the card into the CX452 unit.
- Connect cable runing to the PoE device (horizontal run) to upper jacks.
- Connect the lower jacks to the network switch.
- At the remote end of the cable run connect your PoE device
Front Panel
Rev. 110907
Standard
568B Wiring