Nitek VB39F - Manual

INSTALLATION GUIDE
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-2300005
Fax: +31(0)320-282186
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
Video Balun Transceiver for Twisted Pair
(with built-in surge suppression)
VB39F
Video Balun Transceiver with fixed BNC for twisted pair operation with other balun trans-
ceivers or active receivers. The VB39F has built-in surge suppression for added equip-
ment protection.
The VB39F video balun transceiver is a video transmission device that provides a low cost
means of sending live video over unshielded twisted pair, point-to-point wiring for dis-
tances of up to 750 feet (225 meters) with other passive balun transceivers, up to 1,500
feet (450 meters) with TR515 single channel and model 51 series hubs, and up to 3,000
feet (900 meters) with TR560 and model 56 Series hubs. The VB39F is compatible with all
the "up-the-coax" control systems. A basic system uses (2) video balun transceivers, one
at each end of a twisted pair of wires.
These units are intended for use over existing in-house telephone wiring, Category wiring
or other twisted pair cable runs to provide a convenient, cost effective alternative to coax.
The VB39F is designed to provide superior immunity from noise and interference even
when running next to line power! The VB39F also provides a unique mounting tab and
strain relief
Description