Nova-Tech CPWplus - Manual (Page 8)

© Adam Equipment Company 2008 6
3.2 LOCATING
•
The scales should not be placed in a location that will reduce
the accuracy.
•
Avoid extremes of temperature. Do not place the scale in
direct sunlight or near air conditioning vents.
•
Avoid unsuitable surfaces. The table or floor should be rigid
and free from vibration.
•
Avoid unstable power sources. Do not use the scale near
large users of electricity such as welding equipment or large
motors.
•
Do not place the scale near vibrating machinery.
•
Avoid high humidity that might cause condensation. Avoid
direct contact with water. Do not spray or immerse the scales
in water.
•
Avoid air movement such as from fans or opening doors. Do
not place the scale near open windows or air-conditioning
vents.
•
Keep the scales clean. Do not stack material on the scales
when they are not in use.