Nova-Tech CQT Series - Manual (Page 11)

5.0 PARAMETERS
The balance has 3 parameters that can be set by the user.
FUNCTION SECTION DESCRIPTION
Auto Off See section 5.1 Sets the auto power off function
Backlight See section 5.2 Sets the backlight
OFF BL backlight is off
1 BL backlight is automatic
2 BL backlight is always on
Weighing unit See section 5.3 Sets the units to be used
kg – g – lb – oz – ct – dr – GN – N‐tl.t
5.1 AUTO POWER OFF
The auto power off function helps conserve power, when using the batteries or AC
adapter. The Auto switch-off time may be set up by the user and is the time after a
period of inactivity i.e. no weight movement or key presses.
1) To set this parameter turn the power off press and hold the [Tare] key then
press the [on/off] key once, then release the [Tare] key.
2) The display will show the first function XX PWR, where XX is the last setting.
3) Press [Tare] to select the settings as follows:
Off PWR
Auto power off
10 PWR
10 seconds before the power will switch off
20 PWR
20 seconds before the power will switch off
30 PWR
30 seconds before the power will switch off
40 PWR
40 seconds before the power will switch off
50 PWR 50 seconds before the power will switch off
60 PWR
60 seconds before the power will switch off
70 PWR
70 seconds before the power will switch off
80 PWR
80 seconds before the power will switch off
90 PWR
90 seconds before the power will switch off
4) Press the [Unit] key to confirm the setting
5) To exit turn the balance off and back on again
11 | P a g e © Adam Equipment Company 2008