Nova-Tech Taylor M-3000 TTi3000 Colorimeter Series - Manual (Page 15)

11 TTi ™ Colorimeter Series Quick-Start Guide
STEP 8
Zero the Colorimeter
Select ZERO using ;
then press ENTER .
Zero will be displayed.
STEP 9
Prepare Sample
Typical procedure for
preparing a sample:
a. Remove sample cell
from sample cell
compartment; then
remove cap.
b. Add test reagents
(not required for this
example). Replace cap
and mix thoroughly.
c. Insert sample cell into
sample cell compart-
ment. Align marks.
Align
arrow on
sample
cell with
notch on
meter.