Nova-Tech Taylor M-3000 TTi3000 Colorimeter Series - Manual (Page 21)

17 TTi ™ Colorimeter Series Quick-Start Guide
MAINTENANCE
Do not use chemicals, solvents, or abrasives to clean
or dry any part of the instrument. Clean and dry the
enclosure, display, sample cell compartment, and
sample cells after use or when needed as follows:
• Enclosure – Use a soft, non-abrasive cloth and
water or mild detergent.
• Display – Be careful not to scratch the display.
Use a soft, non-abrasive cloth or lens tissue and
water or mild detergent.
• Sample Cell Compartment – Be careful not to
scratch the sample cell compartment. Use the
foam brush (supplied), a soft, non-abrasive cloth
or lens tissue and water or mild detergent.
• Sample Cells – Be careful not to scratch the
sample cells. Use the foam brush (supplied)
or a soft, non-abrasive cloth and water or mild
detergent. Rinse thoroughly with deionized or
distilled water.