A&D Weighing Indicator AD-4405 - Manual (Page 54)

Page 52 AD-4405 Weighing Indicator
14. Internal Printer (OP-06)
Installing the Printer Paper (Special roll paper)
Step 1 Open the cover.
Step 2 Cut the paper end for easy insertion.
Step 3 Install the paper end and press
the FEED key at the same
time. (Paper Feed)
Step 4 Arrange the ribbon using the dial.
Step 5 Pass the paper end through the
cover and close the cover.
Replacing the Ink Ribbon
Step 1 Open the cover.
Step 2 Press the left side of the ink ribbon to
remove it.
Step 3 Replace with a new ink ribbon.
Step 4 Arrange the ribbon using the dial.
Step 5 Close the cover.