Perma Pure Mini-GASS 2812T - Manual (Page 11)

11 Mini-GASS User Manual
Note: It is recommended that a fused
disconnect (not provided) be installed in
power line coming into system. Power
can then be shut off before performing
any maintenance or service procedures.
Figure 6
3.2 Electrical Connection
Mini-GASS Model # 1220, 1214, and 2812P (Portable) have a power cord and plug for
110 VAC and a power cord with pigtail wires for the 220 VAC version.
Mini-GASS Model # 1228 and 1235: Connect power supply line to terminal block located on
the backplate of the control enclosure inside 1/2” conduit hub. Refer to Figure 5 for color
coding.
Alarm Relays: The SIVS2 has a 6 pole terminal block that will allow for field wiring of alarm
relays for connection of external alarm
equipment (refer to Figure 6). Relay contacts are rated
at 250 VAC, 3A resistive.
G L1 N
Figure 5
N
.C
.
N
.C
.
C
O
M
N
.O
.
N
.O
.
C
O
M
Low Dryer
Temperature
Alarm Relay
Low Purge
Air Flow
Alarm Relay