Bosch Roxx´x HomeProfessional Beutelloser Bodenstaubsauger BGS6PRO2 titanium - Manual (Page 10)

10
!
Caution
The
filter can only be cleaned if the appliance is swit-
ched o ff.
● To clean the plate filter, turn the knob at least three
times 180 ° clockwise.
You can also clean the filter if the suction is becoming
less power
ful, even if the indicator has not lit up.
We recommend that you clean the plate filter before
emptying the dust container. It must be cleaned at the
latest when the “Sensor Control” indicator lights up
:
I f the indicator flashes three times in quick succession,
even though the plate filter has been cleaned, this is
probably due to a dirty fluff filter. In this case, the
appliance automatically adjusts to the lowest power
setting and the indicator lights up red permanently.
● Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in “Cleaning the fluff filter”. Figure
Vacuum cleaner with “SelfClean” function
Figure
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator turns red
and
flashes, the appliance switches off automatically
Filter cleaning is activated and per formed by the inte-
grated cleaning motor.
I f the appliance cleans three times in quick succession,
this is probably due to a dirty fluff filter. In this case,
the appliance automatically adjusts to the lowest
power setting and the indicator lights up red.
● Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter". Figure
Figure
I
f required, you can also activate cleaning manually by
pressing the “Clean” filter cleaning button.
You can also clean the filter if the suction is becoming
less power
ful, even if the indicator has not lit up.
We recommend that you clean the plate filter before
emptying the dust container.
Figure
I
f the plate filter is particularly dirty, it can also be
rinsed clean.
● Turn the bottom part of the filter system clockwise
as far as the stop.
● Remove the plate filter from the filter system.
● Rinse the filter under running water.
● When it has dried completely, insert the plate filter
into the filter system and lock the bottom part by tur-
ning it anticlockwise.
Under normal circumstances, and the appliance is used
as intended
for household cleaning, the plate filter
does not need to be removed or cleaned manually in
order to achieve the optimum power level.
26
23
26
24
25
Emptying the dust container
Figure
In order to achieve good vacuuming results, the dust
container should be emptied a
fter every use or, at the
latest, when dust or dirt has visibly collected on the
fluff filter or when dust at one point in the container
has reached the height o
f the marking.
When emptying the dust container, always check how
dirty the
fluff filter is and, if necessary, clean it as
detailed in the "Cleaning the fluff filter" instructions.
Figure
Figure
● Fold up the carrying handle, unlock the dust contai-
ner by folding up the hand grip and take the dust
container out o f the appliance.
Figure
a)Release the filter unit of the dust container by pres-
sing the release button.
b)Take the filter unit out of the dust container and
empty the dust container.
Figure
a)Insert the filter unit into the dust container, making
sure it is correctly seated.
b)Push the release button back into its original positi-
on until it clicks into place, in order to ensure that
the container has been closed properly.
c)When re-inserting the dust container into the appli-
ance, make sure it is correctly seated.
Fold back the hand grip to lock the dust container in
position in the vacuum cleaner.
Filter care
Cleaning the plate filter
Your appliance is equipped with a "Sensor Control"
Function.
Figure + Figure This function con-
stantly monitors whether your vacuum cleaner is achie-
ving its optimum power level. The indicator light lets
you know when you need to clean the plate
filter, so
that the vacuum cleaner can reach its optimum power
level once more.
Vacuum cleaner with “RotationClean” function
Figure
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator
flashes
red, the plate filter must be cleaned. The appliance is
automatically adjusted back to the lowest power set-
ting.
Figure
● Switch the appliance off in order to clean the plate
filter.
17
26
18
19
20
23 21
21
22
*Dependent on model