Before using for the fi rst time – Bosch TES803F9DE VeroSelection exclusiv Kaffeevollautomat Front Edelstahl Gehäuse hochglanz anthrazit User Manual

Page 33

Advertising
background image

29

TES803F.. | 04/2013

en

Before using for the

fi rst time

General

Fill the water tank with pure, cold, uncar-

bonated water only and preferably use only

beans or coffee blends suitable for fully

automatic espresso and coffee machines.

Do not use coffee beans that have been

glazed, caramelised or treated with other

additives containing sugar, since they will

block the brewing unit.

The water hardness setting can be adjusted

on this appliance. The factory setting for

the water hardness is 4. Check the hard-

ness of the water you use with the enclosed

test strip. If a value other than water hard-

ness 4 is displayed, change the setting on

the appliance accordingly after switching on

(see “Menu settings –

Water hardness

”).

Setting up the appliance

● Place the fully automatic espresso

machine on a fl at, water-resistant surface

that can take its weight.

Important: Only use the appliance in

frost-free rooms. If the appliance has been

transported or stored at temperatures below

0 °C, wait at least 3 hours before operation.

● Pull out the mains plug from the cable

compartment

24 and plug it in. Adjust the

length of the cable by pushing it back in

and pulling it out. To do this, place the

appliance with its back fl ush with the edge

of the work surface and either pull the

cable

downwards or push it upwards.

● Lift the lid of the water tank

12.

● Remove and rinse the water tank

11 and

fi ll it with fresh, cold water. Do not fi ll

above the “

max” mark.

● Replace the water tank

11 and push it

fi rmly downwards into place.

● Close the water tank lid

12 again.

● Fill the bean container

15 with coffee

beans.

● Press the power switch

1 O / I . The

start button 8 lights up and the different

languages appear in the display

5.

The following languages can be selected:

Deutsch English

Français Nederlands

Italiano

● Use the buttons

<

and

>

4 to select the

language in which you want the display

texts to appear.

Sprache
Deutsch

start

English

Français

The selected language is highlighted.

● Press the

start button 8. The language

you selected is saved.

● The brand logo lights up in the display

5.

The appliance now heats up and rinses.

Some water will run out of the coffee

outlet

9.

● The appliance is ready for use when the

symbols for the drink selection and the

start button 8 light up in the display 5.

Espresso

ЛЛ

Н

В Г А Б Е Ж

Info: The factory settings of the fully auto-

matic espresso machine are programmed

for optimal performance. The appliance

switches off automatically after 1 hour (see

“Menu settings –

Auto Off after

”).

TES803F_MK.indb 29

08.05.2013 12:21:10

Advertising