Cleaning and service short rinse milk system, Start calc‘nclean, Cleaning and service descale – Bosch TES803F9DE VeroSelection exclusiv Kaffeevollautomat Front Edelstahl Gehäuse hochglanz anthrazit User Manual

Page 47: Start clean

Advertising
background image

43

TES803F.. | 04/2013

en

Specially developed and suitable descal-

ing and cleaning tablets are available

from retailers or customer service.

Accessories Ordering number

Retail

Customer

service

Cleaning

tablets

TCZ6001 310575

Descaling

tablets

TCZ6002 310967

Cleaning the milk system

Duration: approx. 1 minute

Cleaning and service
Short rinse

milk system

start

Calc‘nClean

The milk system

10 can be pre-cleaned

automatically.

● Press the

à

button

3.

Short rinse milk system

start

● Press the

start button 8.

Place glass under frother, place

suction pipe in glass

start

● Place an empty glass under the milk

system

10 and put the end of the pipe

10d in the glass.

● Press the

start button 8. The milk system

is cleaned automatically.

● Now empty the glass and clean the

suction pipe

10d.

In addition to this, clean the milk system

thoroughly at regular intervals (by hand or

in the dishwasher).

Descaling

Duration: approx. 30 minutes.

Cleaning and service
Descale

start

Clean

The start button

8 flashes while the different

descaling processes are running.

The figures on the top right indicate the

progress of the programme.

Important: If there is a water filter 27 in

the water tank

11, it needs to be removed

before the service programme is run.

● Press the

à

button

3.

Descale

start

● Press the

start button 8; the display 5 will

guide you through the programme.

Empty drip tray

Replace drip tray

● Empty the drip tray

23 and reinsert it.

Place 1 l container

Place suction pipe in container

start

● Place a container with 1 litre capacity

under the milk frother

10.

● Place the end of the suction pipe

10d in

the container.

● Press the

start button 8.

Remove filter

start

Info: If the water filter 27 is activated, the

display will prompt you to remove the filter

27, then press the start button 8 again.

TES803F_MK.indb 43

08.05.2013 12:21:15

Advertising