Bosch TES50651DE VeroCafe LattePro Kaffeevollautomat Helles Anthrazit Morning Haze - Manual (Page 45)

41
TES506.. | 02/2014
en
Problem Cause Solution
Display shows
Refill beans!
although the bean container
(1) is full, or the grinding unit
does not grind the beans.
Beans are not falling into
the grinding unit
(beans too oily).
Gently tap the bean container (1).
Change the type of coffee if
necessary.
When the bean container (1) is
empty, wipe it with a dry cloth.
No hot water dispensed. The milk frother (6) is
soiled.
Clean the milk frother (6), see
“Maintenance and daily cleaning”.
Too little or no milk froth
or
the milk frother (6) does not
draw the milk in.
The milk frother (6) is
soiled.
Clean the milk frother (6), see
“Maintenance and daily cleaning”.
Milk unsuitable for
frothing.
Use low-fat milk (1.5 % fat).
The milk frother (6) is not
correctly assembled.
Wet the milk frother parts and
press together firmly.
Build-up of limescale in
the appliance.
Descale the appliance as
described in the instructions.
Coffee dispensing slows to a
trickle or stops completely.
Coffee is ground too
finely. Pre­ground coffee
is too fine.
Adjust the grinding unit to a
coarser setting. Use coarser
pre-ground coffee.
Build-up of limescale in
the appliance.
Descale the appliance as
described in the instructions.
Coffee has no “crema”. Unsuitable type of coffee. Use a type of coffee with a higher
proportion of robusta beans.
The beans are no longer
fresh.
Use fresh beans.
The grinding setting
is not suitable for the
beans.
Adjust grinding setting to fine.
Coffee is too “acidic”. The grinding setting
is too coarse or the
pre-ground coffee is too
coarse.
Adjust the grinding unit to a finer
setting or use finer pre­ground
coffee.
Unsuitable type of coffee. Use a darker roast.
Coffee is too “bitter”. The grinding setting
is too fine or the pre-
ground coffee is too fine.
Adjust the grinding unit to a
coarser setting or use coarser
pre-ground coffee.
Unsuitable type of coffee. Change type of coffee used.
Display shows
Error
Call hotline
The appliance has a
fault.
Please call the hotline.
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions.
Simple troubleshooting