Document Outline

• Table of Contents
• Chapter 1: Introduction
  • 1.1 Features
    • 1.1.1 Connectivity
    • 1.1.2 Performance
    • 1.1.3 Management
  • 1.2 Network Management Options
  • 1.3 Ports
• Chapter 2: Network Planning
  • 2.1 Management Access Overview
  • 2.2 SNMP Access
    • 2.2.1 Protocols
      • SNMP Protocol
• Chapter 3: Hardware Installation and Setup
  • 3.1 Installation Overview
  • 3.2 Safety Recommendations
  • 3.3 Site Requirements
    • 3.3.1 Environmental Requirements
    • 3.3.2 Power
    • 3.3.3 Cooling and Airflow
    • 3.3.4 Rack Mounting
  • 3.4 Preparing for Installation
  • 3.5 Unpacking and Inspecting
    • 3.5.1 Recommended Tools
  • 3.6 Installing the Switch
    • 3.6.1 Mounting the Switch in a Rack
    • 3.6.2 Desktop or Shelf Mounting
  • 3.7 Applying Power
  • 3.8 Ethernet Cabling
  • 3.9 Connecting to the Console Port
    • 3.9.1 Wiring Map for Serial Cable
• Chapter 4: Connecting Network Devices
  • 4.1 Twisted-Pair Devices
    • 4.1.1 Cable Guidelines
    • 4.1.2 Connecting to PCs, Servers, Hubs and Switches
    • 4.1.3 Network Wiring Connections
  • 4.2 Interpreting LEDs
    • • Fast Ethernet
  • 4.3 Connectivity Guidelines
    • 4.3.1 Fast Ethernet Ports
    • 4.3.2 Combo Ports
  • 4.4 Cable Labeling and Connection Records
• Chapter 5: Configuring the Switch
  • 5.1 Connecting to the Switch
  • 5.2 Direct Access
  • 5.3 Initial Logon
• Chapter 6: Using the Interface
  • 6.1 General Information Menu
    • • Heading
  • 6.2 Basic Configuration Menu
    • 6.2.1 Administration Configuration
      • • Map: Main Menu->Basic Configuration Menu->Administration Configuration
    • 6.2.2 IP Configuration
      • • Map: Main Menu->Basic Configuration Menu->IP Configuration
    • 6.2.3 SNMP Configuration
      • • Map: Main Menu->Basic Configuration Menu->SNMP Configuration
        • Map: Main Menu->Basic Configuration Menu->SNMP Configuration->SNMP Management Configuration
        • Map: Main Menu->Basic Configuration Menu->SNMP Configuration->Trap Configuration
        • Map: Main Menu->Basic Configuration Menu->SNMP Configuration->Trap Receiver Configuration
    • 6.2.4 Port Configuration
      • • Map: Main Menu->Basic Configuration Menu->Port Configuration
        • Map: Main Menu->Basic Configuration Menu->System Security
    • 6.2.6 Forwarding DB
      • • Map: Main Menu->Basic Configuration Menu->Forwarding DB
    • 6.2.7 SNTP Configuration
      • • Map: Main Menu->Basic Configuration Menu->SNTP Configuration
    • 6.2.8 ARP Table
  • 6.3 Advanced Switch Configuration
    • 6.3.1 VLAN Management
    • 6.3.2 Link Aggregation
    • 6.3.3 Port Monitoring
    • 6.3.4 MSTP Configuration
    • 6.3.5 Access List Configuration
    • 6.3.6 Quality of Service Configuration
    • 6.3.7 Storm Control
    • 6.3.8 802.1 Port Based Access Control
    • 6.3.9 IGMP Snooping
    • 6.3.10 Power over Ethernet
    • Map: Main Menu->Advanced Switch Configuration->Power over Ethernet
  • 6.4 Statistics
  • 6.5 Tools
    • 6.5.1 TFTP Software Upgrade
    • 6.5.2 Configuration File Upload/Download
    • 6.5.3 System Reboot
    • 6.5.4 Ping Execution
    • 6.5.5 System Log
  • 6.6 Save Configuration
  • 6.7 Run CLI
• Appendix A: Basic Troubleshooting
  • A.1 Diagnosing Switch Indicators
  • A.2 Power and Cooling Problems
  • A.3 Installation
  • A.4 In-Band Access
• Appendix B: Specifications
• Appendix C: Cables and Pin Assignments
  • C.1 Twisted-Pair Cable and Pin Assignments
    • C.1.1 Pin Assignments for 10BaseT/100BaseTX
    • C.1.2 Straight-Through Wiring
    • C.1.3 Crossover Wiring
  • C.2 Pin Assignments for 1000BaseT Pin
  • C.3 Cable Testing for Existing Category 5 Cable
    • C.3.1 Adjusting Existing Category 5 Cabling to Run 1000BaseT
  • C.4 Fiber Standards
• Appendix D: FCC Compliance and Warranty Statements
  • D.1 FCC Compliance Statement
  • D.2 Important Safety Instructions
  • D.3 IntraCore Warranty Statement
• Appendix E. Online Warranty Registration