PROLiNK PHC105 User Manual - Manual (Page 15)

PROLiNK® PHC-105 User’s Manual www.prolink2u.com
Version 1.00 10 English
4.5 Check On-Spot Video
Make a video call to the camera, after connecting with the camera, input 4 digits valid password (default user password
1234), users can watch the on-spot video on mobile phone.
Method
a) Make a video call: Use a WCDMA supported mobile phone to make a video call to the camera.
b) Type in the password: After connecting with the camera, your mobile phone will show password dialog box
(see Figure 2), 4 digits valid password must be input for continuing.
Mobile phone keys of the video calling menu are as bellows:
DTMF(KEY) Function
0,1,2,3,4,5,6,7,8,9 0,1,2,3,4,5,6,7,8,9
#
Delete one character or return to previous
menu
* Yes or enter next menu
 If the password is wrong, it will indicate “Wrong passcode. Please try again.” (See Figure 3)
 If you input 5 times incorrect password, you have to ring off and redial the camera after 3 minutes. If the
camera is dialed within 3 minutes, it will show not available and ring off. (See Figure 4)
Figure 2 : Enter password Figure 3 : Wrong password Figure 4 : Camera is being disabled.
Note
For any interface, if you don’t input within 30 seconds, camera will ring off automatically.
c) Watch the on-spot vide: If the input password is verified correctly, users can watch and control the on-spot
video through following keys on mobile phone:
DTMF(KEY) Functions for video calling
3 Reduce
1 Enlarge
0 Enter menu
2 Motor turns upward
8 Motor turns on left*
4 Motor turns on right*
Remark：Functions with * need hardware supporting.