PROLiNK PHC105 User Manual - Manual (Page 6)

PROLiNK® PHC-105 User’s Manual www.prolink2u.com
Version 1.00 1 English
CHAPTER 1 FEATURES AND ACCESSORIES
1.1 Main Functions
 Multi-mode alarm: Camera can send alarm notification in 4 ways – send to mobile phone by SMS, MMS and
video phone-call (Need 3G network support), also can send photos to E-mail address.
 Send photos at any time to mobile phone or to E-mail address: The camera sends images to MMS enabled
mobile phones or to E-mail address with color display for you to watch anytime and anywhere GSM network
coverage and MMS service coverage.
 Infrared light: The built-in high-light infrared LED’s allows the camera to capture clear images in dark
environments.
 Built-in microphone: User can listen in the monitoring area via mobile phone by calling the camera.
 Check on-spot video: Any WCDMA mobile phone can call the camera and watch the on-spot video.
 Built-in infrared body heat detector.
 Built-in memory card: Alarm images or video can be stored.
 Preset one phone number to receive alarm messages.
 Remote control: Control and configure the camera with SMS commands from a mobile phone.
 Easy installation: Wireless connection.
 Built-in Lithium battery: Rechargeable battery ensures operation of camera amid external power failures.
1.2 Package Contents
a) Camera host (including 1 TF card)
b) Power adapter
c) USB cable
d) User’s Manual
e) Quick Installation Guide
f) CD
1.3 Light Indicator
Color Action Status
Red Flash slowly Searching the network.
Flash quickly motion detection alarm or Infrared body detects alarm
Constant Light Not installed SIM/USIM card, or the remote camera damaged.
Green Constant Light Defense status, Activating the auto-alarm function.
Flash slowly Cancel defense status. Canceling the auto-alarm function.
Flash quickly Data processing during sending alarm or in standby status or voice call.
Light two seconds Successfully reset factory setting.
Note:
1. Slow flashes 1 time per second, quick flashes 2 times per second.
2. Under normal working conditions, the indicator can be closed absolutely: Under normal working conditions, press SET key for 5-10
seconds, the indicator will open/close. A “DI” tone can be heard after setting successfully.
3. If you press SET key for more than 10 seconds, the camera will be reset.