Bosch TDS4550 Centro de planchado Sensixx B45L Styline EAN 4242002684154 - Manual (Page 15)

15
en
Any damage caused by the use of the
aforementioned products, will make the
guarantee void.
• The iron is not designed to rest on its heel. Please
always position it horizontally on the iron pad (2).
• The iron pad can be placed into the specially
designed recess on the appliance or somewhere
suitable alongside the ironing area.
Never rest the iron on the appliance without
the iron pad!
• During its irst use the iron may produce certain
vapours and odours, along with white particles on
the soleplate, this is normal and will stop after a
few minutes.
• While the steam release button is pressed, the
water tank may produce a pumping sound, this is
normal, indicating that water is being pumped to
the steam tank.
Setting the temperature (B)
By default, the steam station automatically chooses
the “auto” temperature setting. If necessary, the
temperature setting may be modiied and adapted to
your needs.
1. Check the ironing instruction label on the garment
to determine the correct ironing temperature.
2. Select the required ironing temperature setting:
Temperature icon on
display
Suitable for
Any type of fabric which
can be ironed.
Synthetics
Silk – Wool
Cotton – Linen
3. The selected temperature icon will lash while the
soleplate (16) is heating and will stop lashing as
soon as the soleplate has reached the selected
temperature.
Tips:
• Sort your garments out based on their cleaning
symbol labels, always starting with clothes that
have to be ironed at the lowest temperatures.
• If you are not sure what the garment is made of
then begin ironing at a low temperature and decide
on the correct temperature by ironing a small
section not usually seen when worn.
Ironing with steam (C)
The steam control is used to adjust the amount of
steam produced when ironing.
By default, the steam station automatically chooses
the “auto” steam setting.
The steam setting can be changed by the user by
changing the temperature. The steam station will
propose the suitable steam level automatically.
Temperature icon on
display
Steam setting
If necessary, the steam level can be adapted to your
needs by touching the icon on the display (8).
The selected icon lashes until the pressure
corresponding to each steam level is reached. Steam
is now ready to be released by pressing the steam
release buttons (13 or 14*).
Attention:
• When ironing on a lower temperature setting
,
only press the steam release button (13) for a few
seconds at a time.
If you ind that water is dripping out of the soleplate,
set the temperature to a higher position (take care
that the garment can be ironed on this heat
temperature setting).
• At the beginning of each use, it is possible that
drops of water will be dispensed alongside steam.
Therefore, it is advisable to try the iron on the
ironing board or a piece of cloth to start with.
“Pulse steam” function
This appliance has a special function for tackling
dificult creases. The “Pulse steam” function helps
soften stubborn garments like jeans or a linen
tablecloth faster.
When the steam release button is activated, the
steam generator will release three powerful shots of
steam so that the steam reaches even deeper into
the fabrics.
1. Set the temperature to the
setting.
2. Press the steam release button (14*) on the top of
the handle.