Bosch TDS4550 Centro de planchado Sensixx B45L Styline EAN 4242002684154 User Manual

Page 19

Advertising
background image

1

en

Problem

Possible causes

Solution

Water lows through the

holes on the soleplate.

• The steam function is being used

before it has reached the correct

temperature.

• The water is condensing inside

the pipes because steam is being

used for the irst time or has not

been used for a long time.

• Reduce the steam low when ironing at

low temperatures.

• Point the iron away from the ironing area

and press the steam release button until

steam is produced.

Dirt comes out through

the soleplate.

• There is a build up of scale or

minerals in the steam tank.

• Chemical products or additives

have been used.

• Use tap water mixed 50% with distilled

or demineralised water. To prolong the

optimum steam function, mix tap water

with distilled water 1:1. If the tap water in

your district is very hard, mix tap water

with distilled water 1:2.

• Clean the soleplate with a damp cloth.

• Never add products to the water.

The iron does not

produce any steam.

• The boiler is not switched on or

the water tank is empty.

• The steam regulation is set to the

minimum position.

• Set the main power button (9) to the “I”

position (illuminated in red), and/or ill the

water tank.

• Increase the steam low (see section C).

The ironed garment

turns dark and/or sticks

to the soleplate.

• The selected temperature is

too high and has damaged the

garment.

• Select a suitable temperature for the

material being ironed and clean the

soleplate with a damp cloth.

The soleplate turns

brown.

• This is a regular consequence of

usage.

• Clean the soleplate with a damp cloth.

The appliance makes a

pumping sound.

• Water is being pumped into the

steam tank.

• Water tank (1) is not correctly

inserted in the housing.

• The sound will not stop.

• This is normal.

• Adjust the water tank correctly.

• If the sound will not stop, do not use

the steam generator and contact an

authorised technical service centre.

Loss of pressure during

ironing.

Steam release button activated

during a long period of time.

Use the steam release button at intervals.

This improves the ironing result as the

textiles will be dry and stay smooth better.

Water spots appear

on the garment during

ironing.

May be caused by steam

condensed on the ironing board.

Wipe the textile cover of the ironing board,

and iron the spots without steam to dry

them.

Water spots appear on

the garment during use

of the “Pulse steam”

function.

Water spots are caused by steam

condensation in the hose when

cooling down after use.

Water drops stop coming out of the

soleplate after using the “Pulse steam”

function for some time.

The hose gets hot

during use.

This is normal.It is caused by the

steam passing through the hose

during steam ironing.

Place the hose on the opposite side so that

you cannot touch the hose during ironing.

Water leakage from the

boiler.

Filter (12) located at the side of the

appliance is loose.

Tighten up the ilter.

The iron does not stop

steaming after placing it

on the pad (2).

“Pulse steam” function activated by

double click.

Just press the trigger once again and the

iron will stop steaming at once.

If the above does not solve the problem, get in touch with the authorised technical service.

You can download this manual from the local homepages of Bosch.

Advertising