ALESIS X User Manual

Page 5

Advertising
background image

3

Front Controls

The front of the guitar combines traditional controls with two special switches for the built-
in effects.

1.

Pickup Selector Switch – The five-position switch selects one of the following pickup

combinations:

1-Bridge only. 2-Bridge + Middle. 3-Middle only. 4-Middle + Neck. 5-Neck only.

All three pickups are humbucking models, which greatly reduce noise relative to non-

humbucking pickups. The bridge-position pickup has the traditional side-by-side
humbucker configuration. The middle- and neck-position pickups use a “stacked single-
coil” configuration.

2.

Volume Knob - This knob attenuates (lowers) the output from the X Guitar’s pickups.

It is independent of the effects and acts before them.

3.

Program Up/Down Switch – Increment or decrement the effect program using this

switch.

4.

Effects On/Off Switch – Flip this to the upward position to turn on the effects. Be

sure to turn it off after playing to conserve the batteries.

5.

Output Jack – For stereo output, plug a TRS cable into this

jack to connect the guitar to a mixer or recording device. (You
may need to use “Y” cables or a special breakout cord.)

Plug in a TS (mono) cable to connect to a guitar amplifier.

Plug in a pair of headphones for private performance.

Advertising