Acer Altos G540 Series - Manual (Page 54)

3 System upgrade 44
Removing a HDD cage
1 Perform the pre-installation instructions described on page 37.
2 Prepare the HDD cage for removal.
• For a hot-plug HDD cage, disconnect the data and power
cables from the backplane board, then remove all HDDs from
the cage.
• For an easy-swap HDD cage, disconnect the data and power
cables from their HDD connectors, then remove all HDDs from
the cage.
3 Remove the HDD cage.
(1) Move the release slider all the way up to eject the hot-plug
HDD cage.
(2) Remove the cage from the HDD bay.
4 Observe the post-installation instructions described on page 38.