Saving the configuration, Aving the, Onfiguration – ADC 400F User Manual
Page 32
Saving the Configuration
24
Megabit Modem 400F User Manual
S
AVING THE
C
ONFIGURATION
As you make changes to the modem configuration, click the
Submit
button on the Web page to
accept changes and write the changes to RAM. Some configuration changes are not permanent,
however, until you write them to Non-Volatile RAM (NVRAM) and reset the modem. You
must reset the modem to effect these changes:
•
LAN IP address
•
LAN network mask
•
when DHCP is enabled (see
Bridge/Router system mode):
–
primary DNS IP address
–
secondary DNS IP address
•
RIP version (see
for selecting version and direction for RIP)
See the following sections to:
•
save configuration changes to NVRAM on
•
reset the modem to activate the configuration on
•
reset the modem to restore the factory default values on