Fulton Caliber (CAL) SOLA Gateways User Manual
Page 12
__________________________________________________________
_____________________________________________________________________________________
Questions? Call (315) 298-5121 or visit us online at
www.fulton.com
©The Fulton Companies 2013
Supplement SOLA-IOM-2013-0220
2. Connect your computer to the ProtoNode via the Ethernet port, using a standard Cat5 cable.
Please keep the following points in mind when trying to connect to the ProtoNode in this
manner:
a. The ProtoNode must be powered and running during this process.
b. If your computer has both Ethernet and Wireless connections available you will have to
disable the wireless connection temporarily during this process. See
Disabling the Wireless Connection
for a basic tutorial on disabling your wireless connection.
c. You must set your Ethernet connection to a static IP address and subnet. See
for a basic tutorial on static IP or if you have trouble connecting.
Static IP Address:
192.168.1.101
Static Subnet Address: 255.255.255.0
* Please note: if you already have a static IP address loaded in your computer write
that information down so you can restore that IP when you are complete. *
d. Plug the Cat5 cable into the Ethernet port on the ProtoNode and then into your
computer’s Ethernet port. Connection will take some time to complete. If you’re using
Windows, you should receive a notification at the task bar when it’s complete.
3. Once you have successfully made a connection, double left click on the Profile.bat file and wait
for it to complete. A window that resembles this one will pop up; when it disappears the
download is nearly complete.
* Example window showing Profile.bat running.
4. After the window disappears, the ProtoNode will automatically restart itself to complete the
downloading process. This process can take several minutes, so now would be a good time to