Teledyne 2010B - Split architecture thermal conductivity analyzer User Manual

Page 10

Advertising
background image

Teledyne Analytical Instruments

1-2 Part I

1 Introduction

Model 2010B

1.2

Typical Applications

A few typical applications of the Model 2010B are:

•

Power generation

•

Air liquefaction

•

Chemical reaction monitoring

•

Steel manufacturing and heat treating

•

Petrochemical process control

•

Quality assurance

•

Refrigeration and storage

•

Gas proportioning control.

1.3

Main Features of the Analyzer

The main features of the Model 2010B Thermal Conductivity Analyzer

include:

•

Three independent, user definable, analysis ranges allow up to
three different gas applications with one concentration range
each, or up to three concentration ranges for a single gas applica-
tion, or any combination.

•

Special recalibration range for multiple applications. Recalibrat-
ing one, recalibrates all.

•

Automatic, independent linearization for each range.

•

Auto Ranging allows analyzer to automatically select the proper
preset range for a given single application. Manual override
allows the user to lock onto a specific range of interest.

•

RS-232 serial digital port for use with a computer or other digital
communications device.

•

Six adjustable concentration set points with two alarms and a system
failure alarm relay.

•

Extensive self-diagnostic testing, at startup and on demand.

•

A 2-line alphanumeric display screen, driven by microprocessor
electronics, that continuously prompts and informs the operator.

•

High resolution, accurate indication of target or impurity gas
concentration from large, bright, meter readout. (0-9999 ppm
through 0-100 % depending on types of gas involved.)

•

Standard, proven sensor cell design.

Advertising