Teledyne 3010MA – Paramagnetic oxygen analyzer, no 0-100% range – (superceded) - Manual (Page 18)

Part 1 Control Unit Model 3010MA
Teledyne Analytical Instruments 18
• Network—For future expansion. Not implemented at this
printing.
•
50-Pin Equipment Interface Connector—provides access for:
•
Alarms—2 concentration and 1 system alarm
•
Analog Outputs—0-1 Vdc concentration and 0 -1 V dc
range ID. 4-20 mA concentration and optional 4-20 mA
range ID.
•
Remote Span/Zero—Digital inputs for external control of
analyzer calibration
•
Calibration Contact—Special contacts to signal that the
instrument is being calibrated and not monitoring sample
•
Range ID Contacts—Separate, dedicated range relay contacts
for low medium and high ranges
Figure 1-2 Rear Panel of Model 3010MA Control Unit