Teledyne 6700-C Total Organic Carbon Analyzer (Hi-Temp Combustion version) - Manual (Page 19)

High Temperature Combustion Installation/Startup
Teledyne Analytical Instruments 19
Installation and Startup
The Model 6700C is often configured for a specific application as
requested by the customer. Optional equipment and any application
specific configuration of this instrument will be described in an
addendum to this manual. Please check the front of this manual for any
addenda that may be included.
3.1 Installation
Installation of the Total Organic Analyzer includes:
1. Unpacking
2. Mounting
3. Gas Connections
4. Electrical Connections
5. Testing the System
6. Unpacking the Analyzer
The analyzer is shipped with all the materials you need to install
and prepare the system for operation. Carefully unpack the analyzer and
inspect it for damage and immediately report any damage to the
shipping agent.
Note: If the Reactor has been packed and shipped separately,
please follow the instructions below to properly prepare
and install the Reactor.
Open the door of the Combustion Module. Figure 3-1 shows the
reactor properly installed in the furnace.
See also Section 5.3.6.