Teledyne BDS-3000 - Oxygen analyzer - Manual (Page 55)

Oxygen Analyzer Operation
Teledyne Analytical Instruments 41
PSWD Restrictions
Removed
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Change Password?
<ENT>=Yes <ESC>=No
Press ESCAPE to move on, or proceed as in Changing the
Password, below.
4.3.3.2 I
NSTALLING OR
C
HANGING THE
P
ASSWORD
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the
opportunity to change the password:
Change Password?
<ENT>=Yes <ESC>=No
Press ENTER to change the password (either the default TETAI or
the previously assigned password), or press ESCAPE to keep the
existing password and move on.
If you chose ENTER to change the password, the password
assignment screen appears.
T E T A I
<ENT> To Proceed
or
A A A A A
<ENT> To Proceed
Enter the password using the __ arrow keys to move back and forth
between the existing password letters, and the __ arrow keys to change
the letters to the new password. The full set of 94 characters available
for password use are shown in Table 4-1 below.
When you have finished typing the new password, press Enter. A
verification screen appears. The screen will prompt you to retype your
password for verification.
A A A A A
Retype PWD To Verify