Teledyne 9110T - Nitrogen Oxides Analyzer - Manual (Page 178)

Model 9110T NOx Analyzer Data Acquisition System (DAS) and APICOM
Teledyne Analytical Instruments 178
Starting at the EDIT CHANNEL MENU
SETUP X.X 0) CONC: ATIMER 5, 800
PREV NEXT INS DEL EDIT PRNT EXIT
SETUP X.X NAME: CONC
<SET SET> EDIT EXIT
Continue pressing <SET or SET> until ...
SETUP X.X RS-232 REPORT: OFF
<SET SET > EDIT PRNT EXIT
Use the PREV and
NEXT buttons to
scroll to the DATA
CHANNEL to be
edited.
SETUP X.X RS-232 REPORT: OFF
OFF ENTR EXIT EXIT discards the new
setting.
ENTR accepts the
new setting.
Toggle these buttons
to turn the RS-232
REPORT feature
ON/OFF.
7.1.3.8. HOLDOFF Feature
The DAS HOLDOFF feature prevents data collection during calibration operations.
To enable or disable the HOLDOFF, follow the instruction shown in Section 7.1.3 then press: