Teledyne LGA-3500 - Laser Gas Analysis system - Manual (Page 26)

Installation Model 3500
Teledyne Analytical Instruments 12
Two 8” adjustable wrenches—used to tighten
socket screws in purging system.
Socket screwdrivers M6 hexagonal socket screwdriver—used
to tighten M6 hexagonal socket bolt on the
receiver and transmitter box cover.
M5 hexagonal socket screwdriver—used to
tighten M5 hexagonal socket bolt on the receiver.
Screwdrivers 6mm slotted screwdriver—used to rotate the M8
fastening screws between the instrument and the
weld flanges, and the purging apparatus snap ring
screws.
3mm slotted screwdriver—used to connect
electric parts and components.
Digital multimeter.
Tubing cutter.
Tube bender for 6 and 12 mm tubing
Figure 3-1: General Layout of the Model 3500 Series Analyzer