Electronics International TC-1P - Manual (Page 19)

16
SPECIFICATIONS and OPERATING FEATURES
S0912941
9/12/94
Models: (Temperature Monitoring Instruments) C-1P, T-1P, E-1P, CC-1P, EE-1P, EC-1P, TT-1P, TC-1P.
Weight: C-1P, T-1P, E-1P - 7 oz. (unit only)
EE-1P, CC-1P, EC-1P, TC-1P - 11.2 oz. (unit only)
6' T.C. Cable - 2 oz. (20' T.C. Cable = 7 oz.)
TIT or CHT Probe - 1.6 oz.
Environmental: Meets TSO C43a
Power Requirements: 7.5 to 30 Volts, 1/10 Amp.
Display: LCD’s (viewable in direct sunlight), with 12 and 24 volt backlight control wires.
Over-Temp Warning Light: This light comes on when the displayed temperature exceeds the Max. Limit
marked on the front of the instrument. This light will flash during power-up.
External Warning Control Line: Grounds when the Over-Temp Warning Light is on. Current must be
limited to 2/10 of an amp.
Display Temperature Range: 1999’F to -1999’F
Accuracy: 1/2% in accordance with TSO C43a.
Resolution: 1’F (with enhanced stability and response circuits).
Probes: Type K, Ungrounded (for improved accuracy, stability and reliability).
Extension Cables: Type K, any length or size (you may use your existing type K cables).
Models: (Remote Switches) RS-5-1P, RS-5-2P, RS-7-1P, RS-7-2P, RS-2-2
Weight: RS-2-2P, RS-5-1P, RS-5-2P RS-7-1P- 3.2 oz. (unit only)
RS-7-2P - 4.9 oz. (unit only)
Environmental: Meets TSO C43a
Contacts: Gold
Contact Resistance: <50 milliohms
Angle of Throw: 30 degrees
Rotational Torque: 3.5 to 7.5 ounce-inches