Electronics International TC-1P - Manual (Page 21)

Channel #1
Channel #2
Channel #3
Channel #4
Channel #5
Channel #6
Primary Channel,
to TIT Probe.
18
Remote Switch Connected to a Primary TIT Channel
This configuration allows a primary TIT instrument to monitor one TIT and all the EGT's for a
four or six cylinder engine.
"Wht/Violet and
Wht/Gray" Pair
Represents Two Connections.
Single or Dual Display
Instrument
TIT
Channel
RS-5-2P and RS-7-2P Only
On the back of the RS-5-2P and RS-7-2P there are two groups of the above wires. When one of these
switches is used with an Electronics International Dual Display Instrument they can simultaneously select
the following:
1. Right and Left TIT and EGT's for a twin engine aircraft.
2. Right and Left CHT's for a twin engine aircraft.
3. TIT, EGT's and CHT's for a single engine aircraft.
RS-7-1P or RS-7-2P
Only
"Brown" Pair
"Red Stripe" Pair
"Orange" Pair
"Yellow" Pair
"Green" Pair
"Blue" Pair
"Black" Pair