Prestige series - edge-lit led exit series – Emergi-Lite Prestige Edge-Lit Series User Manual
Page 2
![background image](/manuals/345913/2/background.png)
Prestige Series - Edge-Lit LED Exit Series
Emergi-Lite
Tel: (888) 552-6467
Fax: (800) 316-4515
www.emergi-lite.com
05/12 750.1421 Rev. C
2/4
Trim plate installation
1. The trim plate module comes assembled for surface mount or
recessed ceiling mount installation (Figure 4). If surface or recessed
ceiling mount, continue with step 3.
2. Recessed wall-mount installation (Figures 5a,b,c)
a. To remove the electronic module, unscrew a bracket on either
end of the module. If the unit has a transformer: disconnect the
transformer harness from the electronic module in the plastic
housing. Remove the electronic module.
b. Unscrew the side plate of the trim plate body. Turn the side plate
around and screw it back in place, this time flush with the trim
plate body.
Figure 3b wall mount
Figure 4
Surface ceiling mount
Surface wall mount
Recessed ceiling mount
Recessed wall mount
Figure 5a
Lip up
Lip down
Figure 5b
Figure 3c end mount