FEC MICRO NR - Manual (Page 26)

Chapter 3: System Description
Page 3-2
3.1 System Block Diagram
3.1.1 System Block Diagram Description
{ Spindle programming / monitoring is accomplished through either a detachable Laptop PC or
an embedded HMI PC, running the MNR User Console software package.
{ A keypad/display on each MNR Unit can be used to monitor the individual spindle status.
{ Discrete 24 VDC (Sinking or Sourcing) I/O on the MNR unit provides direct communications
with the PLC for limited individual spindle control.
Discrete
PLC I/O.
User Console HMI
Embedded
Serial Output (1) Ports
Serial Printer
Misc. Serial Device
User Console
Detachable Laptop
OR