FEC MICRO NR - Manual (Page 59)

FEC Micro Nutrunner Operations Manual Chapter 6: Fastening Instructions (Rev. 2: 02/12)
Page 6-3
Angle/Time
13: Standard Torque
14: Speed Change Torque
16: Snug Torque
Torque
12: Peak Torque High
11: Peak Torque Low
20: Angle Low Limit
22: Standard Angle
21: Angle High Limit
42: Fastening Time Limit
68: Rundown Revolutions Low Limit
69: Rundown Revolutions High Limit