Fire Fighting Enterprises Talentum IR3 Flame Detector - Manual

16
This document is IS Flame Detector Installation Guide/2008/Issue 3
1
Intrinsically Safe
Flame Detector
Installation Guide
General
This Installation Guide gives information on the intrinsically safe (I.S.) version of the flame
detectors that have been approved by BASEEFA (British Approvals Service for Electrical
Equipment in Flammable Atmospheres). The requirements of the European Community
Directive 94/9/EC, the ATmosphere EXplosives ATEX Directive have been met. The approval
has been accessed to European Standards EN 60079-0, EN 60079-11 and EN 60079-26.
The detectors are certified II 1 G Ga Ex ia IIC T4 and can be used with all listed gases.
The range comprises single infra-red (IR), dual infra-red (IR²) and triple infra-red (IR³) flame
detectors. The detector housings are available in zinc metal alloy or stainless steel and also
stainless steel (antistatic) glass filled polycarbonate.
The guide also provides information on intrinsic safety, the application, maintenance,
installation and adjustments of the detectors. Reference to other individual detector
publications can be made for more information on none intrinsically safety issues. These
publications are available on request.
Information in this guide is given in good faith, but the manufacturer cannot be held responsible
for any omissions or errors. The company reserves the right to change the specifications of
products at any time and without prior notice.