Fire Fighting Enterprises Talentum IR3 Flame Detector - Manual

12
This document is the Exd Flame Detector Installation Guide/2010/Issue 3
1
Flameproof – (Ex d)
IR² and IR³ Flame Detector
Installation Guide
General
This Installation Guide gives information on the Flameproof (Ex d) version of the flame
detectors that have been approved by Baseefa. The requirements of the European Community
Directive 94/9/EC, the ATmosphere EXplosives ATEX Directive have been met. The approval
has been accessed to the following European Standards EN60079-0, EN 60079-1 and EN
60079-26.
Also the flame detector has been accessed and approved to IECEx requirements.
The detector enclosures are certified category II 2 G D, Ex d IIC T4 Gb
Ex tb IIIC T135°C Db IP66 A21
Tamb = -40°C to +125°C
The range comprises dual infra-red (IR²), triple infra-red (IR³) and UV/IR² flame detectors. The
detector housings are available in copper free aluminium alloy (LM25) and stainless steel
(316).
The guide also provides information on Flameproof (type‘d’) enclosures, the application,
maintenance, installation and adjustments of the detectors. Reference to other individual
detector publications can be made for more information on none Flameproof issues. These
publications are available on request.
Information in this guide is given in good faith, but the manufacturer cannot be held responsible
for any omissions or errors. The company reserves the right to change the specifications of
products at any time and without prior notice.