3 key operation, 1 lcd displays, 2 banner – FIREPOWER 5820XL User Manual

Page 2

Advertising
background image

IntelliKnight 5820XL Installation Manual

8-2

151209

8.2.1

LCD Displays

The control panel LCD displays system messages, annunciates alarms, supervisories and
troubles; provides status information; and prompts for input. These messages can be up to 80
characters, displaying over four lines of 20 characters each. Annunciator keys beep when they
are pressed.

8.2.2

Banner

The banner is the message that displays on the control panel when the system is in normal
mode (no alarm or trouble condition exists and menus are not in use). You can create a
customized message that will display instead of the internal (default) message. See Section
7.6.7 for information on customizing the banner.

Figure 8-2 Banner Display Examples

8.3 Key Operation

The key on the control panel board assembly is for accessing the Main Menu. The key is
activated when it is turned once to the right (clockwise). If the key has been used to activate
the menu, it must be turned counter-clockwise to exit the menu.

Figure 8-3 Using a Key to Access the Main Menu

Advertising