Safety procedures – Direct Lift HR8000 User Manual

Page 17

Advertising
background image

TWO COLUMN 8K FLOOR PLATE LIFT

CO7589

IN50014 Rev. D 03/2/2010

17

Lift is not intended for outdoor use and has an operating ambient temperature range

of 41º-104ºF (5º-40ºC).

SAFETY PROCEDURES

• Never allow unauthorized persons to operate lift. Thoroughly train new employees in the

use and care of lift.

• Caution - the power unit operates at high pressure.
• Remove passengers before raising vehicle.
• Prohibit unauthorized persons from being in shop area while lift is in use.
• Total lift capacity is 8,000 lbs. @ 2,000 lbs per lifting pad. Do not exceed maximum

weight capacity of lift.

• Prior to lifting vehicle, walk around the lift and check for any objects that might interfere

with the operation of lift and safety latches; tools, air hoses, shop equipment.

• When approaching the lift with a vehicle, make sure to center the vehicle between the

columns so that the tires will clear the swing arms easily. Slowly drive the vehicle
between the columns. It is recommended to have someone outside the vehicle guide
the driver.

• Always lift vehicle using all four pads.
• Never use lift to raise one end or side of vehicle.
• Always raise vehicle about 3” and check stability by rocking vehicle.
• Prior to lowering vehicle, walk around the lift and check for any objects that might

interfere with the operation of lift and safety latches; tools, air hoses, shop equipment.

• Always lower lift to the lock position before going under vehicle. Never allow anyone to

go under the lift when raising or lowering.

Advertising