Direct Lift HR8000 - Manual (Page 8)

TWO COLUMN 8K FLOOR PLATE LIFT CO7589 IN50014 Rev. D 03/2/2010 8
TOOLS & EQUIPMENT REQUIRED FOR INSTALL
The installation of this lift is relatively simple and can be accomplished by two men in a
few hours. The following tools and equipment are needed:
• Hoist or Forklift (optional)
• Two 10’ to 12’ step ladders
• ISO 32 Light Hydraulic Oil (approx. 12 quarts)
• Tape Measure
• Rotary Hammer Drill with 3/4 in. Drill Bit (Core Drill Rebar Cutter recommended)
• 4’ Level
• Metric Sockets and Open Wrench set
• Vise grips
• 8mm Socket Head Wrench
• Torque wrench with 1-1/8" socket for anchors
• Teflon Tape