Fairbanks Series II Bench Scales - Manual (Page 8)

07/10 8 50777 - Rev. 6
A. Function Keys
= [AutoTare] = Enter
B. Program
Press and hold any key while powering ON. The display will show CAL.
Press the [ON/ F] key goes to program sequence.
Press the [ON/ F] key for parameter selecting and
Press the [AutoTare] key to enter choice and advance to the next step.
The program sequence is as follows:
Displays: Definition
A. Zero Range Or . 0 100% of Capacity
Or . 1 2% of Capacity
B. Auto power off AoFF 0 None
AoFF 1 5 minutes
AoFF 2 10 minutes
AoFF 3 20 minutes
AoFF 4 30 minutes
C. Backlit bL 0 None
bL 1 Active
bL 2 Auto lighting while loading
D. Counting mode SAMP 0 Counting mode Disable
SAMP 1 Counting mode Enable
Instrument will count down 9..8..7..6..5..4..3..2..1..0 and return to the weigh mode.
Section 3: Programming
= Select