Fairbanks BlueLineFS Scale System - Manual (Page 15)

Section 2: Company Service Information
8/09 15 51198 Rev. 2
OVERVIEW
Physical Installation Notes
• Check all devices for proper operation. If any error messages occur, refer to
Troubleshooting or the proper manual of that device.
• No physical alterations (mounting holes, etc.) are allowed during installation.
Electronic Component Care
• Much of the equipment consists of printed circuit assemblies, which must be
installed using
ESD handling procedures .
• These assemblies must be replaced as assemblies or units.
• Replacement of individual components is not allowed.
• These components must be returned intact for replacement credit per normal
procedures.
• The AC receptacle / outlet shall be located near the Indicator and easily
accessible.
• Electrical connections other than those specified may not be performed.