Fairbanks BlueLineFS Scale System - Manual (Page 17)

Section 2: Company Service Information
8/09 17 51198 Rev. 2
Service Technician’s Responsibilities
9 All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to
be adjusted or calibrated to performance specifications may be charged to
warranty.
9 The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures, and must be replaced as units.
─ Replacement of individual components is not allowed.
─ The assemblies must be properly packaged in ESD protective material and
returned intact for replacement credit per normal procedures.
Users’ Responsibility
9 Absolutely no physical, electrical or
program modifications other than
selection of standard options and
accessories are to be made to this
equipment.