Wheel kit assembly steps, continued, Always raise the wheels off the floor – Fairbanks Aegis Drum Scales User Manual
Page 16
Advertising
Section 2: Scale Installation
04/10
16 51190 Rev. 2
2.2.2. Wheel Kit Assembly Steps, Continued
11. Place the Indicator and Stand on the Plate, lining up their holes together.
12. Secure the Indicator, Stand and Plate into place using the fastening bolts supplied
with the Wheel Kit.
13. Connect the cable to the Instrument according to the appropriate Instrument
Service Manual.
14. Calibrate the Platform to the Instrument according to the Instrument Service
Manual.
Always raise the Wheels off the floor
before calibrating or using the Scale.
Weighing or storing the Scale with the Wheels down can
damage the Scale or can cause personal injury.
W A R N I N G !
Advertising