Fairbanks Aegis Drum Scales - Manual (Page 18)

04/10 18 51190 Rev. 2
Section 3: User Operations
3.1. MOVING THE SCALE WITH A WHEEL KIT
1. Remove all objects from the Platform.
2. Remove the AC Power from the
Instrument, if applicable.
3. Pull down each of the three (3) pivoting
Wheel Cam Levers, lowering and locking
each wheel onto the floor.
 Please work carefully.
 Possible Pinch Point.
4. Using the T-handle, move the scale to the
desired location.
5. Once the scale is repositioned, raise the
wheels by lifting each of the Wheel Cam
Levers.
─ The wheels will be raised approximately
1/16” above the floor line.
6. Reapply AC Power to the Instrument, if
applicable.
3.2. CHANGING POSITION OF TOP PLATE
The Top Plate Assembly can rotate the
Indicator to any viewing angle (360°).
1. Loosen the three (3) ¼” Allen
Screws on the collar of the Top Plate
Assembly.
2. Rotate the Top Plate Assembly to the
best position.
3. Re-tighten the set screws.