Fairbanks PC2250 Utility Software - Manual (Page 11)

Section 1: General Information
6/12 11 51214 Rev. 7
Powering up the FB2250
Press the ON / OFF Key for 1 to 2 seconds. The Instrument will display “888888”
followed by a “1234567890” character display moving from right to left, followed by
the revision of software. Upon completing the warm-up, the FB2250 will display the
actual weight on the scale.
To turn the FB2250 off, press the ON / OFF key for 1 to 2 seconds.
Flow Charts
Dashed line boxes used in the flowchart indicate that the menu item availability is
dependant upon programming performed elsewhere. For example, “clearing the
accumulator” will not be available if accumulation has not been enabled.