Fairbanks FB2255 Series Instrument PC2255 PC Software Utility Program - Manual (Page 58)

Section 6: PC2255 Utility Software
01/13 58 51297 Rev. 1
6.8. Custom Output – Settings
CHECKSUM
•
This setting determines whether a
Checksum Character is enabled or not.
•
Checksum is an error detection method
that checks the integrity of the entire string
of data that is transmitted.
DELIMITED
This setting determines if a comma is added
to the output string to separate data fields
contained within the output string.
HARDWARE HAND SHAKING
No current function. Set up for future use.
6.9. Custom Output – Load
A variety of pre-packaged Output Strings is
available.
1. Click the radio button that applies.
Default = Fairbanks
2. Click OK to download the settings, or
Cancel .
– See Appendix 1: Data Output
Formats .
IMPORTANT NOTE:
Customized Outputs use Port 1 only.
The power must be cycled to the FB2255 Instrument whenever custom outputs are
programmed in order for them to take effect.