Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 122)

Section 5: SMA Protocol
10/08 122 51207 Revision 1
5.3.4 Scale Data
Scale Data – First Line
Command: <LF>A<CR>
Reply:
The scale sends the first line of its scale data.
<LF><SMA>:<yyyyyy><CR>
For details, see Chapter 5.4.1 .
Scale Data – Other Lines
Command: <LF>B<CR>
Reply:
The scale sends further lines of its scale data.
<LF><MFG>:<yyyyyy><CR>
For details, see Chapter 5.4.1 .
5.3.5 Scale Information
Scale Information - First Line
Command: <LF>I<CR>
Reply:
The scale sends the first line of its scale information.
<LF><SMA>:<yyyyyy><CR>
For details, see Chapter 5.4.1 .
Scale Information – Other Lines
Command: <LF>N<CR>
Reply:
The scale sends further lines of its scale information.
<LF><TYP>:<yyyyyy><CR>
For details, see Chapter 5.4.1 .
5.3.6 Escape Command
Command: <ESC>
Reply:
This is the only command which does not work according to the protocol principle. It
does not have a reply. The <ESC> character is detected at any time and cancels any
current command.