Finish Thompson CQC-HD - Manual (Page 4)

Safety Precautions
• Read and understand the operation manual completely before operating this unit.
• Always wear proper eye and skin protection when operating and maintaining this equipment.
• Hazardous voltages present. Use only with a grounded electrical outlet (GFI Circuit recommended)
and grounded extension cords. Do not remove the ground prong from the plug.
• Take precautions to keep clothing, hair, hands, hoses, etc. away from all moving parts on the vehicle.
• Cooling systems can be under pressure and extremely hot. Allow the cooling system to
cool down and use extreme caution when removing caps and hoses.
• Antifreeze/coolants are poisonous to people and animals and are also corrosive. Clean up any spills
immediately.
• Continuous monitoring of the quick-change process is required. Leaving the vehicle unattended
while operating this equipment can result in damage to the engine, vehicle, and/or equipment.
• Check for proper operation of quick-change pump and bypass loop. Failure of pump or bypass loop
to operate properly could lead to engine damage.
• Unit is supplied with two locking casters. Make sure they are in the locked position when operating
the equipment.
2.
WARNING:
FAILURE TO FOLLOW THESE PRECAUTIONS CAN RESULT IN SERIOUS INJURY
OR DEATH. !
CAUTION:
FAILURE TO FOLLOW THE PROCEDURES AND PRECAUTIONS AS OUTLINED IN THE
OPERATION MANUAL CAN RESULT IN DAMAGE TO THE ENGINE, VEHICLE OR
EQUIPMENT AND IS NOT SUPPORTED OR WARRANTED IN ANY WAY.
!