Finish Thompson LS-55IIE - Manual (Page 32)

31
CHEMICAL REACTION DISCLAIMER
The user must exercise primary responsibility in selecting the product's material of construction, which are
compatible with the fluid(s) that come(s) in contact with the product. The user may consult Finish Thompson, Inc.
(manufacturer) and a manufacturer's representative/distributor agent to seek a recommendation of the product's
material of construction that offers the optimum available chemical compatibility.
However neither Manufacturer nor agent shall be liable for product damage or failure, injuries, nor any other
damage or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the
products construction and fluids that come into contact with the product's internals.
WARRANTY
Finish Thompson, Inc (manufacturer) warrants this product to be free of defects in materials and workmanship for a
period of 3 years plus a lifetime warranty on the LS Heater, with the exception of the PTFE vessel coating which
carries a 1 year warranty, from date of purchase by original purchaser. If a warranted defect, which is determined by
manufacturer's inspection, occurs within this period, it will be repaired or replaced at the manufacturer's option,
provided (1) the product is submitted with proof of purchase date and (2) transportation charges are prepaid to the
manufacturer. Liability under this warranty is expressly limited to repairing or replacing the product of parts thereof
and is in lieu of any other warranties, either expressed or implied. This warranty does apply only to normal wear of
the product or components. This warranty does not apply to products or parts broken due to, in whole or in part,
accident, overload, abuse, chemical attack, tampering, or alteration. The manufacturer accepts no responsibility for
product damage or personal injuries sustained when the product is modified in any way. If this warranty does not
apply, the purchaser shall bear all cost for labor, material and transportation.
Manufacturer shall not be liable for incidental or consequential damages including, but not limited to process down
time, transportation costs, costs associated with replacement or substitution products, labor costs, product
installation or removal costs, or loss of profit. In any and all events, manufacturer’s liability shall not exceed the
purchase price of the product and/or accessories.
Tech Service Hotline 800-888-3743
Part Number J102856-4, Rev21, 3-5-15
Lit ID No. FT01-829J, 1/6/2012