Toshiba V.92 - Manual (Page 38)

38 Function Check
Determining current connection protocol
5.375 x 8.375 ver 2.4.0
12 Reinstall the Toshiba Software Modem driver.
If you do not have the latest driver, you can download it
from www.toshiba.com.
13 Repeat step 1 through step 6 to run diagnostics again.
The issued AT commands, and the modem’s response,
appear in the Modem Information box. Use the scroll bar,
if necessary, to locate the ATI3 command and its
response.
14 Verify that the driver you installed in step 12 is the
currently installed driver.
Determining current connection protocol
If V.92 features do not appear to be functioning, verify that
the connection is a V.92 connection using the following
procedure.
1 Double-click Control Panel on your computer’s desktop
to open the Control Panel.