Toshiba V.92 - Manual (Page 80)

80 AT Commands
AT command formats
5.375 x 8.375 ver 2.4.0
+VCID=<value>
Valid <value> parameter values are as follows:
Result Codes:
+VCID?
This command displays the current caller ID configuration.
+VCID=?
This command displays the supported +VCID <value>
parameter values.
0 Disables caller ID. This is the default.
1 Enables caller ID, with formatted presentation.
2 Enables caller ID, without formatting.
OK <value> = 0,1,2
ERROR Otherwise